background image

English - 8

Installing the Wall Mount Kit

Lets you mount the TV on the wall. You must use the dedicated wall mount kit (WMN4277S - sold 
separately) for the installation.
For detailed information about installing the wall mount, see the instructions provided with the wall mount. 
We recommend you contact a technician for assistance when installing the wall mount bracket. We do not 
advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury 
to yourself or others if you elect to install the wall mount on your own.
To order the wall mount kit, contact Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864).

VESA Wall Mount Kit Notes and Specifications

 

Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to 
surfaces other than plaster board, please contact your nearest dealer for additional information. If you 
install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.

 

NOTE

 

Standard dimensions for wall mount kits are shown in the table below. 

 

Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly 
are provided.

 

Do not use screws that do not comply with the VESA standard screw specifications. 

 

Do not use screws that are longer than the standard length or do not comply with the VESA 
standard screw specifications. Screws that are too long may cause damage to the inside of the TV 
set.

 

For wall mounts that do not comply with the VESA standard screw specifications, the length of the 
screws may differ depending on the wall mount specifications. 

 

Do not fasten the screws too firmly. This may damage the product or cause the product to fall, 
leading to personal injury. Samsung is not liable for these kinds of accidents.

 

Samsung is not liable for product damage or personal injury when a non-VESA or non-specified 
wall mount is used or the consumer fails to follow the product installation instructions.

 

Do not mount the TV at more than a 15 degree tilt.

 

Always have two people mount the TV on a wall.

Product Family

TV size in 

inches

VESA screw hole specs 

(A * B) in millimeters

Standard 

Screw

Quantity

LED-TV

26

100 X 100

M4

4

32 – 40

200 X 200

M6

46 – 75

400 X 400

M8

 

Remove the screws in the mounting holes before you install the wall mount.

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal 
injury due to electric shock.

[UE9000-ZA]BN68-04533A-00Eng.indb   8

2012-07-03   �� 3:10:32

Summary of Contents for UN75ES9000F































































Reviews: