Samsung UN32F6300AF Service Manual Download Page 62

Page: 62 / 116

4-2-6. No Video (COMPONENT)

Note

Refer to the next page to check the location such a CN201 or IC201 SVC Manual mentioned.

Symptom

Audio is normal but no picture is displayed on the screen.

•

Major

checkpoints

Check the Component source

•

This may happen when the LVDS cable connecting the Main Board and the Panel is

•

disconnected.

Diagnostics

Power indicator LED is off.

Lamp(Backlight) on, no video ?

Check a set in the ‘Stand-by mode’.

Yes

Check the component source and check

the connection of component cables ?

Y, Pb, Pr

Input the component source properly.

Yes

Does the component data appear at ?

COMP2_Y_CVBS : R816

Pb : R817

Pr : R815

Check CN502.

Change the Main Ass’y.

Yes

Check the LVDS clk signal at output of

Main Board. (TX)

TX2_CLK : ODD_TXCLK_DN/DP

TX4_CLK : EVEN_TXCLK_DN/DP

Check IC1001(X12).

Change the Main Ass’y.

Yes

Check the LVDS cable?

Replace the T CON / LCD panel?

Please, Contact tech support.

Caution

Make sure to disconnect the power before working on the IP Board.

4-19

4. Troubleshooting

Summary of Contents for UN32F6300AF





















































































































Search results

Summary of Contents for UN32F6300AF

Reviews:

Related manuals for UN32F6300AF

Brands by name

Popular brands

Samsung UN32F6300AF, Service Manual

Search results

Summary of Contents for UN32F6300AF

Reviews:

Related manuals for UN32F6300AF

Brands by name

Popular brands