Samsung UE46D User Manual Download

Page: 124 / 172

Eco Solution

MENU

→

System

→

Eco Solution

→

ENTER

끄기

Eco Solution

Energy Saving

Screen Lamp Schedule

No Signal Power Off

Auto Power Off

Off

The displayed image may differ depending on the model.

Energy Saving

Reduce the power consumption by adjusting the screen brightness.

•

Off

Low

Medium

High

Screen Lamp Schedule

Enable or disable the lamp schedule.

•

Off

Schedule 1, Schedule 2

Time

The panel brightness will change to the brightness set in

Time

at a specified time.

Lamp

Adjust the panel brightness. A value closer to 100 makes the panel brighter.

•

100

No Signal Power Off

Save power by turning the device off when no signal is received from any source.

•

Off

15 min

30 min

90 min

―

Disabled when an attached PC is in power saving mode.

―

The product will automatically power off at a specified time. The time can be changed as required.

Auto Power Off

This feature automatically turns off the product to prevent overheating if the product is left idle for a specified period of time.

•

Off

4 hours

6 hours

8 hours

Summary of Contents for UE46D













































































































































































Search results

Summary of Contents for UE46D

Reviews:

Related manuals for UE46D

Brands by name

Popular brands

Samsung UE46D, User Manual

Search results

Summary of Contents for UE46D

Reviews:

Related manuals for UE46D

Brands by name

Popular brands