Samsung UE46C User Manual Download Page 118

Page: 118 / 251

118

System

Chapter 08

Multi Control

MENU

→

System

→

Multi Control

→

ENTER

Multi Control

ID Setup

ID Input

MDC Connection

DisplayPort daisy chain

RS232C MDC

Clone

The displayed image may differ depending on the model.

Configuring settings for Multi Control

•

ID Setup

Assign an ID to a set. (Range: 0~99)
Press

▲

▼

to select a number, and press

•

ID Input

Enter the ID number of the product connected to the input cable for input signal reception.
Enter the number you want using the number buttons on the remote control.

•

MDC Connection

Select a method to connect to MDC to receive the MDC signal.

RS232C MDC

: Communicate with MDC via the RS232C-stereo cable.

RJ45 MDC

: Communicate with MDC via the RJ45 cable.

•

DisplayPort daisy chain

To display the

DP IN

video input through the

DP OUT

output port, select a device connection method from Single Stream

Transport (SST) and Multi Stream Transport (MST).

Clone

: In this Single Stream Transport (SST) output mode, the same screen output is displayed on two display devices

connected.

―

Clone

is selected, the PC recognizes the two displays as a single monitor.

―

Clone

mode is enabled if the input source is a digital input other than

DisplayPort

, such as

DVI

HDMI

MagicInfo

Expand

: In this Multi Stream Transport (MST) mode, a different screen output is displayed on two display devices connected.

―

Expand

is selected, the PC recognizes the two displays as separate monitors.

―

The mode functions only on a PC that supports DisplayPort 1.2 MST.

―

For Full HD resolution (1920x1080) displays, a maximum of four displays can be connected.

Summary of Contents for UE46C




























































































































































































































































Search results

Summary of Contents for UE46C

Reviews:

Related manuals for UE46C

Brands by name

Popular brands

Samsung UE46C, User Manual

Search results

Summary of Contents for UE46C

Reviews:

Related manuals for UE46C

Brands by name

Popular brands