Connecting via Bluetooth
8
English (USA)
Connecting to other devices
This headset is compatible with Bluetooth-enabled devices.
1
Headset
Slide the Power switch towards and hold it for approximately three seconds
to enter Bluetooth pairing mode.
When you turn on the headset for the first time, it automatically enters Bluetooth pairing
mode.
2
Other device
Activate the Bluetooth feature and search for Bluetooth devices.
For more information, refer to the other device’s user manual.
3
Other device
Tap
Samsung U Flex (0000)
from the list.
•
The PIN for the headset is the four-digit number in parenthesis displayed on the
other device’s Bluetooth settings screen. The number differs depending on the
headset.
•
Once devices are paired, recently connected devices automatically connect to your
headset whenever you turn it on.
•
If the Bluetooth connection fails or other device cannot locate the headset, remove
the device’s information from the other device’s list. Then, try to connect again.
•
If the headset does not work properly, restart it or try to pair the devices again.
•
The Bluetooth connection range and sound quality may vary depending on the
connected devices.
Summary of Contents for U Flex EO-BG950
Page 1: ...www samsung com User Manual EO BG950 Samsung U Flex Headphones English EU 07 2017 Rev 1 1 ...
Page 586: ...入门指南 3 简体中文 设备部位图 右耳机 音量 按键 通知指示灯 颈带 音量 按键 左耳机 电源开关 话筒 充电器插口 紧固磁铁 激活按钮 播放按钮 充电器插口盖 紧固磁铁 ...
Page 601: ...18 简体中文 制造商 三星电子有限公司 制造商地址 越南北宁省安风县安中1号安风工业区 进口商 三星 中国 投资有限公司 进口商地址 北京市朝阳区东三环中路5号财富金融中心 ...
Page 605: ...入門 3 繁體中文 台灣 裝置配置 右耳機 音量 按鈕 通知燈 頸帶 音量 按鈕 左耳機 電源開關 麥克風 充電埠 緊固磁鐵 啟動按鈕 遊戲按鈕 充電埠蓋 緊固磁鐵 ...