Samsung U Flex EO-BG950, User Manual

Page: 8 / 674

Getting started
6
English (UK)
1
Open the charger port cover. Connect the headset to the USB power adaptor via the USB
cable. Plug the USB power adaptor into an electric socket.
Connecting the charger improperly may cause serious damage to the headset. Any
damage caused by misuse is not covered by the warranty.
2
After fully charging, first unplug the USB cable from the headset, and then unplug it from
the computer or the electric socket.
•
To save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and easily accessible while charging.
•
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
Turning the headset on and off
Bluetooth pairing mode
ON
OFF
Follow all posted warnings and directions from authorised personnel in areas where
the use of wireless devices is restricted, such as aeroplanes and hospitals.