Installing the Product
2-6
2-6
Using it as a TV
You may view television programs on the monitor if it is connected to an antenna or cable/satellite system without installing any
separate TV reception hardware or software on your computer.
1.
Connect the cable/satellite or TV antenna cable to the [ANT IN] port on the rear side of the monitor.
•
When using an indoor antenna/cable/satellite terminal:
Check the antenna terminal on the wall and then connect the antenna/cable/satellite TV cable.
•
When using an outdoor antenna:
When using an outdoor antenna, we strongly suggest using a qualified technician to install it.
2.
When the connections are completed, connect the TV power.
3.
When the product is turned on for the first time after it was purchased, the initial setup operations (<Plug & Play>) begin.
•
Be careful that the coaxial cable is not bent when connecting it to the antenna input terminal [ANT IN].
