Samsung SyncMaster P2270HN User Manual Download

Page: 42 / 56

3-4

Using the Product

Input

(HDMI-CEC)

Connecting Devices

1. Connect the [

HDMI IN

] jack on the TV and the HDMI OUT jack of the corresponding <> device using an

HDMI

cable.

2. Connect the [

HDMI IN

] jack of the home theatre and the HDMI OUT jack of the corresponding <> device using an

HDMI

cable.

Connect the Optical cable between the [

DIGITAL AUDIO OUT (OPTICAL)

] jack on your TV and the Digital Audio Input

on the Home Theatre.

MENU

DESCRIPTION

Source List

Use to select <PC>, <TV> or an external input source connected to the Monitor.Use to select the
screen of your choice.

You can use the [SOURCE] button on the remote control.

•

Edit Name

Name the input device connected to the input jacks to make your input source selection easier.

(HDMI-CEC) <> is a function that enables you to control all connected

Samsung

devices that

support <> with your Samsung TV‘s remote. The <> system can be used only

with

Samsung

devices that have the <> feature. To be sure your Samsung device

has this feature, check if there is an <> logo on it.

Summary of Contents for SyncMaster P2270HN

























































Search results

Summary of Contents for SyncMaster P2270HN

Reviews:

Related manuals for SyncMaster P2270HN

Brands by name

Popular brands

Samsung SyncMaster P2270HN, User Manual

Search results

Summary of Contents for SyncMaster P2270HN

Reviews:

Related manuals for SyncMaster P2270HN

Brands by name

Popular brands