background image

User’s Manual 

 

 

 

 

 

          6 

 

 

 

™

 

Upon Installation 

9

  Please keep at least a 15cm distance between the cooling fan and the wall to 

provide sufficient ventilation. 

9

  Do not drop or install on an unstable surface to avoid shocks and vibration. 

These may cause malfunctions. 

9

  Do not install in areas exposed to direct sunlight or any heat source. 

Excessive heat may cause deformation and malfunctions. 

9

  Please avoid installing a new camera while the existing camera is recording. 

This may decrease the video-quality. To avoid decreasing video quality, 
please only record after installation of a new camera is complete. 

™

 

During Use 

9

  Avoid shock and vibration while operating or moving the item. 

9

  Avoid movement, any impact, or throwing of the item during operation. 

9

  Before adding hard disks from a third party, please contact your sales agent 

and avoid a possible malfunction.   

9

  Using this product in conjunction with hard disks from unauthorized third 

parties is not covered by the product warranty. 

9

  This product is a peripheral device for a security system, not a whole security 

system against fire and theft. Samsung shall not be liable, directly or 
indirectly, for any loss or damage which is caused by, alleged to be caused by 
or caused in connection with the use of this item. 

 

 

 

 

 

 

Samsung Techwin cares for the environment at all stages of 
product manufacturing to preserve the environment, and is 
taking a number of steps to provide customers with more 
environmentally friendly products. 
The Eco mark represents Samsung Techwin’s wish to create 
environmentally friendly products, and indicates that the product 
satisfies the EU RoHS Directive.

 

Caution

 

Misuse or wrongful operation of the item may result in injury or damage to the item. It 

indicates caution should be observed when operating.

 

Summary of Contents for SVS-5R











































Reviews: