Samsung SVR-960A Page 70 User Manual Download

Page: 70 / 90

User Manual

Admin Password

If administrator’s authority is allowed, all functions are available and default value set to “9999”

6.10.4 Time Schedule

It sets the date & time period defined to Weekday Day& Night, Weekend Day & Night.

Weekday Start/End

Among Monday to Sunday, it sets Weekday time period. The other part unset is under Weekend

time period.

Day Start/End

It sets Day time period using up/down direction key. Unset parts means Night time period.

6.10.5 Special Time

Special Time is able to four setups. It can set another specific time period in each time zone

(Weekday (Day), Weekday (Night), Weekend (Day), Weekend (Night)). For example, it can

apply various conditions like setup Lunch time or Conference time separately.

Summary of Contents for SVR-960A



























































































Search results

Summary of Contents for SVR-960A

Reviews:

Related manuals for SVR-960A

Brands by name

Popular brands

Samsung SVR-960A, User Manual

Search results

Summary of Contents for SVR-960A

Reviews:

Related manuals for SVR-960A

Brands by name

Popular brands