Samsung SVR-960A User Manual Download Page 27

Page: 27 / 90

User Manual

4.7

Pause Live screen

It can Pause live screen like PlayBack.

Press [PAUSE] for Pause live screen, and press [PAUSE] button again to return to live

screen.

4.8

PTZ Control

It connects PTZ controller to DVR, and it can control PTZ while

viewing image in real time if it sets relevant protocol to “Serial Setup”

menu.

To execute PTZ, press PTZ button from front function button and

select PTZ function through Func button.

Move to the channel wants to control.

Press PTZ button

or click PTZ button from Function menu

using mouse.

PTZ menu (Pan/Tilt, Zoom/Focus, Load Preset, Save Preset)

appears

After selecting wanted menu among them, click [ENTER] using mouse.

4.8.1 Pan/Tilt Control

This menu is used when it utilize Pan & Tilt from real time monitoring mode.

Select Pan/Tilt from PTZ mode.

It can utilize Pan using left/right direction key at front part and click left/right on screen, Tilt

using Up/down direction key or click up/down on screen.

4.8.2 Zoom/Focus Control

This menu used to utilize Zoom & Focus functions from real time monitoring mode.

Select Zoom/Focus from PTZ mode.

It utilizes for Zoom & Focus functions through direction key at front part or mouse wheel.

4.8.3 Load Preset application

This menu is used when it moves to Preset location from real time monitoring mode.

Select Preset number using up/down button or mouse wheel.

If Preset is set, select Load and press Enter button or click mouse.

4.8.4 Save Preset application

This menu used when it sets Preset location from real time monitoring mode.

Summary of Contents for SVR-960A



























































































Search results

Summary of Contents for SVR-960A

Reviews:

Samsung SVR-960A, User Manual, Page: 27 / 90

Search results

Summary of Contents for SVR-960A

Reviews: