User Manual
44
6.5.2 Setup by Channel
It can set Time Schedule, Macro differently by each channel.
It sets 1~4CH to Weekday day, Low, and can set 5~9 to Full Time, High
Recording Speed/Quality
There are total 5 setup conditions. (No Rec./Low/Standard/High/Custom).
“Custom” can set the status of Speed, Quality and Resolution to user wants.
Resolution
There are total 3 setup conditions. (CIF/HALF/D1)
Resolution value set here is applied to user’s recording, Event recording.
-
CIF : 360x240 @ NTSC, 360x288 @ PAL
-
HALF : 720x240 @ NTSC, 720x288 @ PAL (HALF D1 image)
-
D1 : 720x480 @ NTSC, 720x576@ PAL (FULL D1 image)
Special Time Recording
This menu is used when it differ recording condition with setup specific time zone. Namely, if it
sets specific time zone to Weekday Day, it can record differently according to 2 setup conditions.
Specific time zone sets from ‘System’ menu.
There are total 5 setup conditions; No Rec./Low/Standard/High/Same as above (“Recording
apply same value set from Speed/Quality”)
Event Recording
It sets “On/Off” using left/right button or mouse after pressing [ENTER].
Detailed Event recording condition sets from “Event Recording” menu.
According to Event recording setup, it can set here whether it records based on Event recording