Samsung SVR-960A Page 68 User Manual Download

Page: 68 / 90

User Manual

Repair Record Mode

When no recording space in HDD, it deletes from first recorded data automatically.

Warning Level

It checks all disk size used that is connected or attached to DVR and inform if it records until the

capacity setup.

Block Playback

This menu is to make visible limitedly the recorded image in HDD as much as the date set. If it

records for 30days and sets Block Playback to 2days, it can play the day before including

30days among 30days. It can set from 1day till 31days.

Disk Manager

Disk Manager is to manage internal or external HDD using.

It manages the state indication of HDD, Bad Block, Size, Add, Remove etc.

Disk Status

It can view HDD temperature, state of HDD installed in System.

Type

: It indicates location of disk.

Int A (Internal A HDD), Int B (Internal B HDD), Ext (External

HDD)

Model

: It show model name of HDD

Bad Block

: It indicates Bad Block HDD. When no problem, it indicate 0. In

case when HDD is not Enabling, it does not indicate Bad Block.

Summary of Contents for SVR-960A



























































































Search results

Summary of Contents for SVR-960A

Reviews:

Related manuals for SVR-960A

Brands by name

Popular brands

Samsung SVR-960A, User Manual

Search results

Summary of Contents for SVR-960A

Reviews:

Related manuals for SVR-960A

Brands by name

Popular brands