SVR-1630
Appendix
58
2004. 07. 2004 (v 1.0)
Samsung Techwin
(3) HDD Managing Command
Add
Adds an HDD for recording. The HDD added is automatically formatted.
Add Used
Adds an HDD that has been used and formatted. There is no need to reformat. Only
possible when the HDD is added as a Primary Disk.
Remove
Removes the current HDD. HDDs can be reused without data loss by using the ‘Add
Used’ command.
Confirm Removed
Used when a removed HDD is still listed. ALL DATA WILL BE LOST!
1.2 Replacing
HDDs
1.2.1
Checking HDDs
The DVR file system (VFS2) automatically detects bad sectors, and bad sectors detected are not used.
The cases below are for when an HDD fails or has some connection problems.
(1) When replaying is stopped, or the DVR is rebooted in a specific sector during playback, or when it is not
possible to search images by event.
(2) When recording is stopped and the “Disk Manager” shows the HDD type as [X]
1.2.2 When the primary disk fails
When the primary HDD fails, none of the data in the connected HDDs can be used. So the failed HDD should
be replaced and all the connected HDDs should be removed, added and formatted again.
1.2.3 When an auxiliary disk fails
The failed auxiliary disk should be replaced and reinstalled in “Disk Manager”. (“Add” -> “Format”).
