SVR-1630
Installation and Connection
46
2004. 07. 2004 (v 1.0)
Samsung Techwin
10.2 Adding and Replacing External Storage Device
10.2.1 IEEE1394 Port
The SVR-1630 used IEEE1394 for the external storage device interface. It has
two IEEE1394 ports, one
each on the front and rear panel. With them the
SVR-1630
can expand storage capacity up to 4TB.
<Note>
Some IEEE1394 bays may not be recognized by the
SVR-1630
. Before purchasing, consult your local
vendor to confirm compatibility.
10.2.2 Connecting IEEE1394 Device
When using a FireWire supported external HDD, hard drive bays can be connected to a port in the front panel
or a port in the rear panel. The
SVR-1630
does not supply power to the hard drive bay; therefore only bays that
use external power can be used.
<Note>
When an external HDD is connected while the SVR-1630 is running, the SVR-1630 should correctly
detect the external HDD. If it doesn’t, it is recommended to try connection as follows.
1. Power off the
SVR-1630 and external HDD.
2. Connect the external HDD to the IEEE1394 port.
3. Power on the external device.
4. Power on the
SVR-1630
