Samsung SVR-1630 Installation Manual Download Page 57

Page: 57 / 66

Appendix

SVR-1630

Samsung Techwin

2004. 07. 2001 (v 1.0)

1.1.3 Disk

Manager

(1)

When an HDD is added or deleted physically, the Disk Manager runs automatically after rebooting. If it

doesn’t, you can run

“Menu

Disk

Disk Manager”

from the console.

(2) HDD Type

[R]

Available for recording

depending on successful formatting of the HDD

[V]

Connected and formatted as a DVR file system. If using the ‘Add used’ command, it will be

changed to [R]. There is no need to reformat.

[F]

Connected, but not available, file system. After using ‘Add’, you need to format to make it

like [R]. Otherwise indicates the FAT 32 file system connected for backup.

[C]

Built-in or external CD-Recorder

[X]

The HDD cable is not connected or has some problem. In this case, the HDD should be

removed using the ‘Confirm Removed’ menu.

IntA

Internal Primary HDD

IntB

Internal Auxiliary HDD

R-HDD

HDD in the built-in hard disk rack

Ext

External HDD listing order can be changed according to the recognition

sequence.

Summary of Contents for SVR-1630



































































Search results

Summary of Contents for SVR-1630

Reviews:

Related manuals for SVR-1630

Brands by name

Popular brands

Samsung SVR-1630, Installation Manual

Search results

Summary of Contents for SVR-1630

Reviews:

Related manuals for SVR-1630

Brands by name

Popular brands