Operating Your Camera
COLOR CCD CAMERA
User’s Manual
35
COLOR CCD CAMERA
User’s Manual
34
Refer to the following table if you are experiencing trouble with your camera.
Contact an authorized technician if the table does not provide you with a
solution to the trouble.
Problem
Nothing appears on
the screen.
The image on the
screen is dim.
The image on the
screen is dark.
The camera is not working
properly, and the surface
of the camera is hot.
The DAY/NIGHT menu
does not work.
The SENS-UP function
does not work.
Solution
• Check that the power cord and line connection
between the camera and monitor are fixed properly.
• Check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
• Is lens stained with dirt? Clean your lens with soft,
clean cloth.
• Set the monitor to proper condition.
• If the camera is exposed to too strong light, change
the camera position.
• Adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75
Ω
/ Hi-z
properly.
• Check that you have properly connected the camera
to an appropriate power source.
• Check that AGC of EXPOSURE SETUP menu is
‘OFF’.
• Check that AGC of EXPOSURE SETUP menu is
‘OFF’.
• Check that SHUTTER of EXPOSURE SETUP menu is
‘A.FLK’ .
Troubleshooting
Press the Function Setup switch in the EXIT menu to save the current settings and exit the
SET menu.
EXIT
LANGUAGE : You can select the menu language according to your requirements.
RESET : Resets the camera settings to the factory defaults.
RETURN : Select this to save the SPECIAL menu settings and return to the SPECIAL menu.
