Operating Your Camera
COLOR CCD CAMERA
User’s Manual
21
COLOR CCD CAMERA
User’s Manual
20
SHUTTER : Because of using a DC lens, the shutter speed is fixed.
(NTSC mode l: 1/60 sec, PAL model : 1/50 sec)
When flickering occurs on the screen, select the A.FLK mode using
the Function Setup switch.
- A.FLK : Select this when you experience picture flicker, which can happen when
there is a clash with the frequency of the installed lighting.
AGC (AUTO GAIN CONTROL) :
The higher the gain level, the brighter the screen - but the higher the noise.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 0 to 30dB.
- HIGH : Allows automatic gain control from 0 to 42dB.
• To produce better results with A.FLK, do not use it in conjunction with the WDR
mode of the BACKLIGHT menu.
• When the SHUTTER is set to A.FLK mode, SENS-UP will be disabled.
Notes
SENS-UP :
When it is night or dark, the camera automatically
detects the light level and maintains a clear picture
if this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
RETURN :
Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.
• If you press the Function Setup switch in ‘AUTO’ mode, You can adjust brightness
by increasing or decreasing the shutter speed. (X2~X256)
• Note that the higher the zoom level, the brighter the screen, but the more likely it
is that an after-image will appear.
• Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation
when the zoom level is increased, this is normal.
Notes
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select ‘White Bal.’ by using the
Function Setup switch so that the arrow indicates ‘White Bal.’ .
2. Select a desired mode using the Function Setup switch.
Select one of the following 5 modes, as appropriate for your purpose.
ATW : Select this when the color temperature is between 1800˚K and 10500˚K
INDOOR : Select this when the color temperature is between 4500˚K and 8500˚K.
OUTDOOR : Select this when the color temperature is between 1800˚K and
10500˚K. (sodium light inclusion)
White Balance (White Bal.)
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
AWC
SET : To find the optimal setting for the current luminance environment in
this mode, set the point the camera towards a sheet of white paper
and press the Function Setup switch. If the environment changes,
readjust it.
MANUAL : Select this to fine-tune White Balance manually. Set White Balance
first by using the ATW or AWC mode. After that switch to MANUAL
mode, fine-tune the White Balance and then press the Function Setup
switch.
