Samsung SV-DVD50, Service Manual

Page: 219 / 226

Operating Instructions
Samsung Electronics 4-25
A/V Receiver Connections
Par
ental
54
55
DVD
To take full advantage of the movie theater experience that DVD offers, you may want to connect your DVD-VCR to a complete Surround Sound system, including an A/V Receiver and six Surround Sound speakers. Before You Begin...
•
If your A/V receiver is equipped with a Dolby Digital Decoder, you have the option to bypass the DVD-VCR’s built-in Dolby Digital Decoder. Use the DIGITAL AUDIO OUT connection below.
1D
igital Audio Out
Connect EITHER an optical cable OR a digital coaxial cable from the DIGITAL AUDIO OUT
jacks on the back panel of the DVD-VCR
to their corresponding Digital Audio Input jacks on your A/V Receiver: • Optical
★
(SV-DVD50/SV-DVD55)
• Coaxial • Use whichever connection is available on your A/V Receiver.
To Digital Audio Input of an A/V
Receiver with a Dolby Digital
Decoder
OR
DVD
Rating Control is a password protected system that allows you to block playback of DVDs based on their content. The system uses an eight level rating system. •
If you try to play a DVD that exceeds the selected rating, an error message will appear.
• Not all discs are rated.
1
Open “MENU”
With the DVD in stop mode, press the MENU button.
2
Select “DVD”
Use the
›
or
‚
buttons to highlight “DVD ”
then press the OK or
Š
buttons.
3
Select “Parental Setup”
Highlight “Parental Setup”, then press the OK
or
Š
buttons.
.
4
Select “Use Password”
Highlight “Use Password,” then press O
K
or
Š
button to select one
of the following options: •
No - Indicates that no password is required to view any DVD disc or to change Rating Control options. No additional Rating Control settings are necessary.
•
Yes – Indicates that a password is required to view some DVD discs and to view Rating Control options. The menu will change as shown.
NOTES: •
The first time “Use Password” is set to “Yes,” you will be prompted to enter a new password.
•
If the “Enter Password” screen appears, then “Use Password” Password” has already been set to “Yes.” Please skip to Step 5.
5
Enter Password
Enter a 4-digit password using the 0–9 buttons on the remote control. •
Write your password down, and keep it in a safe place in case you need it to change your settings later.
6
Select “Rating Level”
Move the selection bar to “Rating Level,” then press OK or
Š
to
select.
7
Change Rating Level
Use the
›
or
‚
buttons to select one of the following ratings:
• Level 8 Adult
• Level 4
• Level 7
• Level 3
• Level 6
• Level 2
• Level 5
• Level 1 Kids Safe
All ratings above the level you select will also be blocked, e.g., if you block Level 6, then Levels 7 and 8 will also be blocked. Press OK
or
Š
button to confirm your selection.
•
If you forgot your password, press power on from a RESET with no disc in the unit. Press the
¥¥
and
ŠŠ
buttons
simultaneously on the front panel for 5 seconds. The “Reset ok” message will appear. Press the STANDBY/ON button.
Setup
Setup
Setup :
Display Setup
. .
Use Password
Parental Setup
: No
~
Ye
s
No Yes