Samsung SV-DVD50, Instruction Manual

Page: 20 / 38

39 38
VCR VCR
Playing a Sequence Frame by Frame
VCR
Playing a Sequence at Variable Speeds
Searching for a Specific Sequence
You can:
◆ Stop the cassette at a given frame (image)
◆ Advance one frame at a time
➢
No sound is heard when playing back frame by frame.
1
Press:
◆
❿
ll to start playing the cassette
◆
❿
ll button one more time to make still mode.
◆
F.ADV/STEP ( ) to advance frame by frame
2 To return to normal playback, press
❿
ll.
☛
When you have been using the Frame-by-Frame function
for more than about five minutes, the DVD-VCR will
automatically play to protect the cassette and video
heads.
➢
Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the TRK
( , ) buttons to minimize this effect.
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example:
You wish to analyze a sportsperson’s technique,
movement by movement.
The Shuttle function is available on the Remote control
➢
No sound is heard when playing a sequence at variable
speeds.
1
Press:
◆
❿
ll during playback
◆ SHUTTLE (<<) to play the cassette backwards
◆ SHUTTLE (>>) to play the cassette forwards
2 Each time you press a SHUTTLE button, the speed is changed as
shown in the following illustration.
REVERSE REVERSE REVERSE SLOW SLOW PLAY PLAY PLAY
PLAY PLAY PLAY RPLAY STILL MOTION MOTION PLAY 2PLAY X3 X5 X9
X9 X5 X3 X1/10 X1/5
1 1
1
Each time you record a cassette on this DVD-VCR, an “index” is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
➢
This DVD-VCR uses a standard indexing system (VISS). As
a result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
Go to 0:00:00 Stop
Use this feature when you want to search for the 0:00:00 counter
position on a cassette. Press the CLEAR button at the point on the
tape where you want to set the counter to 0:00:00. Later, while a
cassette is stopped, press up arrow button. The VCR will rewind or
fast forward, searching for the 0:00:00 counter position, and then
automatically stop at that position.
End Serch
Use this feature when you want to search for a blank position to
record a program on a cassette. While a cassette is stopped, press
down arrow button. The VCR will fast forward, searching for a
blank position, and then automatically stop at that position.
If the VCR reaches the end of the tape during end search, the tape
will be ejected.
2 1 1 2
➞
etc.
Prev
Seq. Seq. being
played
Next
Seq. etc.
.
.
1
DVD50-XEU(36-44) 1/27/03 6:40 PM Page 38