Samsung SV-DVD30, Instruction Manual

Page: 12 / 38

Clearing a Preset Station Presetting the Stations Manually
23
GB
If you have stored a TV station:
◆
That you do not require
◆ At the wrong programme position
you can cancel it.
1
After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding ,
❷
buttons to select the Install
option.
3
Press the OK or
❿
to select this option.
Result: The
Install
menu is displayed.
4
Press the corresponding or
❷
buttons, until the Manual
Setup option is selected.
5
Press the OK or
❿
to select a Manual Setup option.
Result: The TV STATION TABLE menu is displayed.
6 Press the corresponding or
❷
buttons, until the required
preset TV station (PR) is selected.
7
Press the CLEAR button.
8
Repeat the same procedure from Step
6 onwards until all the
required stations have been cleared.
9 On completion, press the RETURN button four times to exit the
menu.
☛
You do not need to preset the stations manually if you
have already set them automatically.
1
After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2
Press the corresponding ,
❷
buttons to select the Install
option.
3
Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
4
Press the corresponding or
❷
buttons, until the Manual
Setup option is selected.
5
Press the OK or
❿
to select a Manual Setup option.
Result: The TV STATION TABLE menu is displayed.
6
Press the or
❷
buttons to select a programme number as
required.
7
Press the
❿
button to preset the station.
Result: The MANUAL TUNING menu is displayed.
8 Press the ➛ or ❿ buttons to start scanning channel.
Result: The frequency band is scanned and the first station
found is displayed.
9
Press the or
❷
buttons until the NAME is selected.
The station name is set automatically from the broadcast signal.
10
To change the programme’s name, press the
❿
button.
Result: The first letter of the name flashes.
11
To... Then...
Select a character Press the or
❷
button until the
in the name required character is displayed
(letters, numbers or “-” character).
Move to the next or Press the
❿
or
➛
buttons
previous character respectively.
12
If you... Then...
Wish to store the
◆
Press the corresponding or
❷
buttons,
station displayed until the MFT is selected.
◆
Press the
➛
or
❿
buttons to adjust the
picture, if necessary.
◆
Press OK to store the station
Do not wish to
◆
Press the corresponding or
❷
buttons, store the station until the CH
is selected.
displayed
◆
Press the
➛
or
❿
buttons to go on
scanning the frequency band and
display the next station
◆ Go back to the beginning of Step
12
13
Repeat this procedure from Step
6 onwards, until all the
required stations have been stored.
14 On completion, press the RETURN button four times to exit the
menu.
22
GB
VCR VCR
Auto Setup
Manual Setup
Install
VCR Output CH : CH 60
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
MANUAL TUNING
PR :
CH : - - -
MFT : -
DECODER : OFF
NAME : - - - -
MEMORY : OK
RETURN
TV STATION TABLE
PR CH NAME DEC
1
2
3
4
5
SWAPPING : OK
DELETE : CLEAR
RETURN
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
Auto Setup
Manual Setup
Install
VCR Output CH : CH 60
PR CH NAME DEC
1 21
2
3
4
5
TV STATION TABLE
SWAPPING : OK
DELETE : CLEAR
RETURN
00169C SV-DVD30/XEU-GB2 7/3/03 11:24 AM Page 22