03 MAINTENANCE
maintenance
_11
The Pre-Motor Filter may be hand washed in cold water with mild detergent.
Rinse well and air dry throughly before re-installing.
Inspect the exhaust filter regularly for dust accumulation, and clean if necessary.
The Micro foam filter will separate from the exhaust filter case, but the Hepa filter will not
separate from the exhaust filter case.
The Exhaust Filter is not washable. It must be cleaned in air or replaced when it
becomes dirty.
Check the Pre-Motor filter and Exhaust filter at least once a month and clean or replace
as needs.
CLEANING THE PRE-MOTOR FILTER
CLEANING THE EXHAUST FILTER
The Pre-Motor Filters (Form Filter, Micro Filter) protect the motor from dirt particles. It is
located underneath the Dust Bin. If the Pre-Motor Filters become dirty, remove and clean
filters according to following instruction.
1. Unplug the Vacuum Cleaner from electrical outlet.
2. The Exhaust Filter assists in the filtration process to return clean air to the room. It is
located in the Exhaust Filter Case on the front of the cleaner. If the Exhaust Filter becomes
dirty, remove and clean filter.
1. Unplug the Vacuum Cleaner from electrical outlet.
2. Remove dust bin as described in Empty Dust Bin section.
3. Unlock and remove the filter case.
4. Lift out filter case.
5. Separate form filter and micro filter from filter case.
6. Wash filters and case in cold water only.
7. Dry for at least 24 hours.
8. Ensure filters are completely dry before refitting onto the vacuum cleaner.
Filter Case
Unlock
Lock
Micro Filter
Washable
Form Filter
Filter Case
Micro Foam
Filter
<Hepa Filter>
(Select Models Only)
<Micro Foam Filter>
(Select Models Only)
Exhaust Filter
Case
✽
Option
