Samsung ST43L2HD Instruction Manual Download Page 54

Page: 54 / 92

Special Features

DNIe

(Digital Natural Image engine)

Samsung’s New Technology enables an improved image with detail, contrast and white enhance-
ment and 3D noise reduction.

Press the Menu button.

Press the joystick to enter.

Move the joystick down to

select DNIe, then move the

joystick to the right or left to
select “On”, “Demo” or “Off”.

Quick way to access DNIe:
Just press the “DNIe” button
on the remote control to select
“DNIe On” or “DNIe Demo”.

Press the Menu button to exit.

Guide to DNIe Settings

• On: Switches on the DNIe mode.
• Demo: The screen before applying DNIe appears on the right

and the screen after applying DNIe appears on the left.

• Off: Switches off the DNIe mode.

NOTE

• The DNIe function doesn’t operate in the PC and DVI modes.

DNIe Demo

DNIe On

DNIe Off

Summary of Contents for ST43L2HD





























































































Search results

Summary of Contents for ST43L2HD

Reviews:

Related manuals for ST43L2HD

Brands by name

Popular brands

Samsung ST43L2HD, Instruction Manual

Search results

Summary of Contents for ST43L2HD

Reviews:

Related manuals for ST43L2HD

Brands by name

Popular brands