Samsung SR8980, Instrukcja Obs?Ugi

Page: 246 / 272

30_ operating
Auto Cleaning
The vacuum cleaning robot will move by itself and automatically
clean the house until cleaning is completed once.
If you press the Start/Stop button on the main unit or remote control
■
without selecting a cleaning mode, an automatic cleaning run starts.
If cleaning begins when the vacuum cleaning robot is docked with the
■
charger station, the time to return to the charger is decreased since the
vacuum cleaning robot remembers its original position while moving.
If the vacuum cleaning robot starts the current cleaning run at a location
■
other than the charging station and fails to locate the charging station
while cleaning, it will stop near the location where it started cleaning.
If the battery level becomes too low while cleaning, the vacuum cleaning robot will automatically
■
return to the charger station and resume cleaning after charging its battery. (Number of cleaning
operations resumed : Once)
Main unit button
Remote control
button
Confi guration
Sequence
Normal Mode Normal Mode
Turbo Mode Turbo Mode
Dust Sensor Mode Dust Sensor Mode
Cleaning Complete Cleaning Complete
1time 1time
▶
Set the mode. 1.
Cancel the mode. 2.
About the Resume Cleaning function
If the vacuum cleaning robot has evaluated that cleaning is •
complete, the resume cleaning function is not performed.
If you move the vacuum cleaning robot when it is being
•
charged or press a button, the vacuum cleaning robot
judges cleaning to be complete and does not resume
cleaning.
Do not move the vacuum cleaning robot when it is cleaning •
or press a button while it is cleaning. Otherwise, the
vacuum cleaning robot judges cleaning to be complete and
starts cleaning again from the beginning.
Each time you press the Turbo button, the Turbo icon on
•
the display panel is turned on or off sequentially. When the
Turbo icon is turned on, you can start cleaning in Turbo
mode.
Each time you press the Dust Sensor button, the Dust
•
Sensor icon on the display panel is turned on or off
sequentially. When the Dust Sensor icon is turned on, you
can start cleaning in Dust Sensor mode.
NOTE
CAUTION
DJ68-00632C.indb 30 DJ68-00632C.indb 30 2012.1.25 10:55:55 AM 2012.1.25 10:55:55 AM