Samsung SR8980, Instrukcja Obs?Ugi

Page: 243 / 272

operating _27
03 OPERA
TING
About the IrDA sensor
The infrared signal transmission may not be •
smooth in locations exposed to halogen lamps or
in outdoor locations.
Vacuum cleaning robot uses 3 types of infrared
•
devices and a device may not work in front of
another device with a higher priority.
When controlling the vacuum cleaning robot
•
with the remote control, the vacuum cleaning
robot may cross the virtual fence of the VIRTUAL
GUARD or run against an obstacle, because the remote control signal has a higher priority than
the VIRTUAL GUARD signal.
When using the vacuum cleaning robot in a small location or at a close distance, it may
•
malfunction due to interference of the infrared signals.
Install the VIRTUAL GUARD away from the charger as auto charging may be interrupted if the
•
VIRTUAL GUARD is near the charger.
If more than one vacuum cleaning robot is used simultaneously, they may malfunction due to
•
interference of the infrared signals.
CAUTION
> >
Remote Remote
Control Control
Virtual Virtual
guard guard
Charger Charger
[Infrared Signal Priority] [Infrared Signal Priority]
DJ68-00632C.indb 27 DJ68-00632C.indb 27 2012.1.25 10:55:54 AM 2012.1.25 10:55:54 AM