operating
_21
03
OPERA
TING
Installing the charger
1.
Install the charger on a flat surface.
2.
There should be no obstacles and cliffs 0.5m to the left and
right and within 1 m of the front.
3.
Install the charger in a location where it can be easily accessed by
the vacuum cleaning robot.
4.
Arrange the power cord along the wall.
5.
When the floor is made of wood, install the charger in the same
direction as the grain of the wood.
NOTE
Always keep the power cord of the charger plugged
into the power outlet.
- If no power is supplied to the charger, the vacuum
cleaning robot will not be able to find the charger and will
not be able to charge automatically.
- If the vacuum cleaning robot is separated from the
charger, the battery is automatically discharged.
Power lamp
Charging lamp
about 1m
about 0.5m
about 0.5m
DJ68-00633G-04.indd 21
14. 6. 18. �� 1:38
