26_
network connection and setup
network connection and setup
Setting up Port Range Forward for several network video encoders
When several network video encoders are connect to one Broadband router device, you
should forward the TCP 943 port of the router to the TCP 943 port of a connected network
video encoder.
J
If you don't set properly the TCP 943 port of the router, you cannot get any video stream from the
web page of the network video encoder.
TCP 943 port is a port for the Silverlight policy server of a network video encoder.
You can set a rule of Port Forwarding on the Broadband router device through its
configuration web page.
You cannot change the Silverlight policy server port of a network video encoder.
You can change the ports of the network video encoder except the policy server port
through its configuration web pages.
When Network video encoder1 and Network video encoder2 are connected to a router :
User
Internet
Broadband router
Start
End
Protocol
IP Address
943
943
TCP
192.168.1.100
3000
3000
TCP/UDP
192.168.1.100
3001
3001
TCP/UDP
192.168.1.101
4520
4520
TCP/UDP
192.168.1.100
4521
4521
TCP/UDP
192.168.1.101
8080
8080
TCP/UDP
192.168.1.100
8081
8081
TCP/UDP
192.168.1.101
Network Video Encoder 1
(192.168.1.100)
Web Server Port
8080
VNP Port
4520
RTSP Port
3000
Policy Server Port
943
Network Video Encoder 2
(192.168.1.101)
Web Server Port
8081
VNP Port
4521
RTSP Port
3001
Policy Server Port
943
