setup screen
46_
setup screen
- Sender : Enter the address of the email sender. If the sender address is incor-
rect, the email from the sender may be classified as SPAM by the email server
and thus may not be sent.
- Subject : Enter a subject for your email.
- Body : Provide the text for the massage. Attach the alarm images to the email
that you are preparing.
4.
When done, click [
Apply (
)
].
Motion Detection
You can set target detection region and motion, as well as the alarm signal output.
1.
From the Setup menu, select the
<
Event (
)
> tab.
2.
Click <
Motion Detection
>.
To set the Motion Detection
1.
Set <
Motion Detection
> to <
Enable
>.
2.
Select a sensitivity level of the motion
detection. Higher the sensitivity is, the
smaller motion is detected.
3.
Specify the <
Activation time
>.
Always : Always check if a motion
detects. It activates in operated
mode when the motion detects.
If set to Always, the activation time cannot
be changed.
Only scheduled time : Check if a motion detects at a specified day of the week for
a specified time period. It activates in operated mode when the motion detects.
4.
Specify an operation that will perform if a motion detects.
E-mail sending : Specify the use of the email transfer if a motion detects.
5.
Use the drag-and-drop method to specify the detection area on the video.
Motion detection is activated in the mask area set.
To delete set area, click [
Delete
(
)] button.
6.
When done, click [
Apply (
)
].
