English - 81
Your TV comes equipped with a universal remote control.
In addition to controlling the TV, the universal remote control can
also operate a VCR, Cable box, DVD, and Set-Top Box (even if your
VCR, Cable box and DVD are made by manufacturers other than
Samsung).
➢
The remote control might not be compatible with all
VCRs, DVD players, Cable boxes, and Set-Top Boxes.
1
Turn off your VCR (Cable box or DVD).
2
Press the
MODE
button to switch the remote control to the
VCR
(
CABLE
or
DVD
) mode.
➢
The remote control has five modes :
TV
,
STB
,
VCR
,
CABLE
,
and
DVD
3
Press the
SET
button.
4
Enter 3 digits of the VCR (Cable box or DVD) code listed on the
next page for your VCR (Cable box or DVD).
Example:
To enter the code “6”, press 0, 0, and 6.
To enter the code “76”, press 0, 7, and 6.
5
Press the
POWER
(
) button. Your VCR (Cable box or DVD)
should turn on. If it turns on, your remote control is now set
correctly.
➢
If it does not turn on, repeat the steps above, but try one of
the other codes listed for your particular brand.
6
Once your remote control is set up, press the
MODE
button any
time you want to use the remote control to operate VCR (Cable
box or DVD).
➢
◆
When your remote control is in the
STB
,
VCR
,
CABLE
,
and
DVD
mode, the volume buttons still control your
television’s volume.
◆
When your remote control is in the
TV
mode, the VCR or
DVD control buttons (rewind, stop, play/pause and fast
forward) still operate your VCR or DVD.
Programming the Remote Control for Other Components
o
BP68-00491A (J60C_UK) 2005/04/18 05:12 PM Page 81
