Samsung SOC-4120AN Instruction Manual Download Page 1

Page: 1 / 20

SAMSUNG CCD CAMERA

SOC-4120AN/P

LENS BUILT IN
WDR COLOR CCD CAMERA

INSTRUCTION MANUAL

About this manual

Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.

P/No. : Z6806-0474-01A

VAN 04. 2

•

SAMSUNG TECHWIN CO., LTD.

Optics & Digital Imaging Division 145-3, Sangdaewon 1-Dong,
Jungwon-Gu, Sungnam, Kyungki-Do, Korea 462-703

TEL : 82-31-740-8137~41 FAX: 82-31-740-8145

•

SAMSUNG OPTO-ELECTRONICS AMERICA, INC. (SOA)

Closed Circuit Division 40 Seaview Drive, Secaucus N.J 07094,
U.S.A

TEL : (201) 902-0347 FAX: (201) 902-0429

•

SAMSUNG OPTO-ELECTRONICS UK LTD (SOUK)

Samsung House, 1000 Hillswood Drive Hillswood Business
Park Chertsey Surrey KT16 OPS

TEL : 44-(0)1932-45-5308 FAX: 44-(0)1932-45-5325

•

TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD (TSOE)

7 Pingchang Rd, Nankai Dist, Tianjin, P.R China
Post Code : 300190

TEL : 86-22-2761-9698 FAX: 86-22-2761-6514

SALES NETWORK

www.samsungtechwin.com

www.samsungcctv.com

Summary of Contents for SOC-4120AN





















Search results

Summary of Contents for SOC-4120AN

Reviews:

Related manuals for SOC-4120AN

Brands by name

Popular brands

Samsung SOC-4120AN, Instruction Manual

Search results

Summary of Contents for SOC-4120AN

Reviews:

Related manuals for SOC-4120AN

Brands by name

Popular brands