installation & connection
14_
installation & connection
Installing on the ceiling directly
Remove the top cover from the case by referring to
the “Disassembling” section.
Drill a hole (diameter: 5mm, depth: min 35mm) in a
desired position of the case bottom and insert the
provided plastic anchor (HUD 5) to the end.
Fit the bottom hole to the anchor hole and insert
and fix the ASSY taping screw (TH M4×L30).
When assembling the camera case to a junction box, select
appropriate screw holes on the case bottom for installation.
Connect and arrange the necessary cables lest that
they should be damaged or twisted while installing
the camera.
Install the camera body in the reverse order of
“Disassembling”.
Adjust the lens in a desired direction by referring to the “Adjusting the monitoring
direction for the camera" section.
Close the top cover.
To ensure waterproofing, tight up the fixing bolts using the L-wrench.
Ceiling mount
Remove the top cover from the case by
referring to the “Disassembling” section.
Use the provided template to drill one hole
for the camera, and one for the screw (5
mm in diameter, at least 35 mm in depth),
and insert the plastic anchor (HUR 5) to the
end of the screw hole.
Connect and arrange the necessary cables
lest that they should be damaged or twisted
while installing the camera.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
CAMERA FRONT
