English
_51
●
SETUP SCREEN
WDR Setup
It displays a sharp image of the objects in a scene where both bright and dark areas exist.
Select <
Backlight
>.
Set <
Mode
> to <
WDR
>.
Specify the <
WDR level
>.
WDR is available only if <
Megapixel
Mode
> is set to <
2-Megapixel
>.
If WDR mode is active, the shutter mode
cannot be changed. Data transfer via the
network is available at up to 15 fps.
If the WDR mode is active, a moving object can cause an afterimage on the screen.
Exposure Setup
You can adjust the exposure level of the camera.
Select <
Exposure
>.
Select each item and set it properly.
Brightness : Adjust the screen
brightness.
Shutter mode : Adjust the electronic
shutter of the camera.
ESC (Electronic shutter control) :
Adjust the shutter speed
automatically according to the
ambient brightness.
Manual : Adjust the shutter speed
of the camera manually.
A.FLK (Anti flicker) : This will prevent the screen from flickering.
Shutter speed : Control the shutter speed manually.
SSNR3 : Specify the use of noise reduction.
SSNR3 level : Adjust the noise reduction level.
Sens-up mode : Automatically senses the darkness level at night or in a low
contrast scene and extends the accumulation time accordingly for a bright and
sharp image.
If you set the shutter mode to Manual/A.FLK, SENS-UP mode will be deactivated.
The greater the video accumulation factor is, the brighter the screen is but the afterimage of a
moving object grows accordingly.
1.
2.
3.
M
1.
2.
•
•
-
-
-
•
•
•
•
