Samsung SNV-7080 User Manual Download Page 13

Page: 13 / 106

English

_13

●

INSTALLATION & CONNECTION

installation & connection

INSTALLATION

Precautions before installation

Ensure you read out the following instructions before installing the camera:

Select an installation site (ceiling or wall) that can endure at least 5 times of the
camera weight.

Stuck-in or peeled-off cables can cause damage to the product or a fire.

For safety purposes, keep anyone else away from the installation site. And put aside
personal belongings from the site, just in case.

Disassembling

With the provided L-shaped
wrench, loosen 3 bolts on the top
cover counter clockwise to remove
the cover.

Loosen 3 screws on the camera body
counter clockwise, and pull up the
left/right LOCKER lever (in the arrow
direction) to release the lock. Then,
remove the camera from the case.

•

LOCKER Lever

Bolts

Camera Case

Top cover

Camera Body

Summary of Contents for SNV-7080











































































































Search results

Summary of Contents for SNV-7080

Reviews:

Related manuals for SNV-7080

Brands by name

Popular brands

Samsung SNV-7080, User Manual

Search results

Summary of Contents for SNV-7080

Reviews:

Related manuals for SNV-7080

Brands by name

Popular brands