Samsung SNV-7080 User Manual Download Page 50

Page: 50 / 106

setup screen

50_

setup screen

BLC Setup

You can specify a desired area on the video manually and set the area to be displayed
more clearly.

Select <

Backlight

Set <

Mode

> to <

BLC

Set <

BLC level

You can change the level to adjust the
brightness of the monitoring area.

Set the <

Top, Bottom, Left, Right

levels to specify the target area.

HLC (Highlight Compensation) Setup

When a strong light such as streetlamp or headlight faces forward to the camera, you can
mask that exposed area in order to protect it from being saturated.

Select <

Backlight

Set <

Mode

> to <

HLC

Set the <

HLC level

> and the <

Mask

tone

HLC level : Adjust the brightness
level so as to remove the incoming
highlight from a specific condition.

Mask tone : Adjust the mask tone of
the highlighted area.

At night operation, this function will be activated only if the incoming highlight exceeds a certain
area in a low contrast environment.

At night, HLC will not function if the scene is either too bright or too dark.

•



Summary of Contents for SNV-7080











































































































Search results

Summary of Contents for SNV-7080

Reviews:

Related manuals for SNV-7080

Brands by name

Popular brands

Samsung SNV-7080, User Manual

Search results

Summary of Contents for SNV-7080

Reviews:

Related manuals for SNV-7080

Brands by name

Popular brands