Samsung SNV-5080 User Manual Download Page 29

Page: 29 / 124

English

●

STALLAT

ion &

Conne

ion

inSTALLATion (Snv-5080)

Disassembling

To connect the alarm in/out, the dome cover and lens cover are to be separated.

Using the L-wrench provided, loosen 3

screws by turning them counterclockwise

and separate the dome cover.

Lift up the inner cover while gently pressing

its both ends to separate it from the unit.

Loosen 3 screws by turning them counter-

clockwise, press both left and right lock re-

leases inwards (in arrow direction) to unlock

the stopper, and then separate the camera

from the case.

SNV-5080-1

SNV-5080-2

SNV-5080-3

SNV-5080-4

SNV-5080-5

SNV-5080-6

SNV-5080-7

SNV-5080-8

SNV-5080-9

SNV-5080-10

SNV-5080-11

< SNV-5080 >

SNV-5080-1

SNV-5080-2

SNV-5080-3

SNV-5080-4

SNV-5080-5

SNV-5080-6

SNV-5080-7

SNV-5080-8

SNV-5080-9

SNV-5080-10

SNV-5080-11

< SNV-5080 >

SNV-5080-1

SNV-5080-2

SNV-5080-3

SNV-5080-4

SNV-5080-5

SNV-5080-6

SNV-5080-7

SNV-5080-8

SNV-5080-9

SNV-5080-10

SNV-5080-11

< SNV-5080 >

Summary of Contents for SNV-5080





























































































































Search results

Summary of Contents for SNV-5080

Reviews:

Related manuals for SNV-5080

Brands by name

Popular brands

Samsung SNV-5080, User Manual

Search results

Summary of Contents for SNV-5080

Reviews:

Related manuals for SNV-5080

Brands by name

Popular brands