English
_31
M
CAMERA SETUP
DAY/NIGHT
You can specify a recording mode according to the scene.
Select <
CAMERA SET
> - <
DAY/NIGHT
>.
Select a screen transition mode according to
the illumination, and set options as appropriate.
DAY : Fixed to DAY mode, regardless of the
scene.
NIGHT : Fixed to NIGHT mode, regardless
of the scene.
If BURST is set to <
ON
>, the burst signal will
output.
AUTO : According to the luminance, this will
switch DAY to NIGHT mode, or vice versa.
DAY
NIGHT / NIGHT
DAY : If set to
<
AUTO
>, you can specify the brightness
level triggering the mode switch between
DAY and NIGHT as well as the interval.
MASK AREA : If there exists a bright spot
light source in a night scene, you can specify
the size and position as needed.
Any excessively bright area in a night scene
will be masked.
WHITE BAL
If you need to adjust the screen brightness, use the WHITE BALANCE function.
Select <
CAMERA SET
> - <
WHITE BAL
>.
Select a mode where you set the balance.
DAY : You can set the RED, and BLUE value
in DAY mode.
NIGHT : You can adjust the <
WHITE BAL
>
according to the ambient luminance.
1.
2.
1.
2.
AUTO
BURST
OFF
DAY
NIGHT
BRIGHTNESS MID
DWELL TIME
2S
NIGHT
DAY
BRIGHTNESS MID
DWELL TIME
5S
MASK AREA
1 2
WHITE BAL
DAY/NIGHT DAY
MODE
ATW2
RED [
00] ---- I ----
BLUE [
00] ---- I ----
MASK AREA
<SIZE>
<LOCATION>
