background image

However, nothing else grants you 
permission to modify or distribute the 
Program or its derivative works. 
These actions are prohibited by law if you 
do not accept this License.Therefore, by 
modifying or distributing the Program (or 
any work based on the Program), you 
indicate your acceptance of this License 
to do so, and all its terms and conditions 
for copying, distributing or modifying the 
Program or works based on it.

6.  Each time you redistribute the Program 

(or any work based on the Program), 
the recipient automatically receives a 
license from the original licensor to copy, 
distribute or modify the Program subject 
to these terms and conditions. 
You may not impose any further 
restrictions on the recipients' exercise of 
the rights granted herein. 
You are not responsible for enforcing 
compliance by third parties to this 
License.

7.  If, as a consequence of a court judgment 

or allegation of patent infringement or for 
any other reason (not limited to patent 
issues), conditions are imposed on you 
(whether by court order, agreement or 
otherwise)that contradict the conditions 
of this License, they do not excuse you 
from the conditions of this License. If 
you cannot distribute so as to satisfy 
simultaneously your obligations under 
this License and any other pertinent 
obligations, then as a consequence you 
may not distribute the Program at all. 
For example, if a patent license would 
not permit royalty-free redistribution of 
the Program by all those who receive 
copies directly or indirectly through you, 
then the only way you could satisfy both 
it and this License would be to refrain 
entirely from distribution of the Program.

If any portion of this section is held invalid 
or unenforceable under any particular 
circumstance, the balance of the section 
is intended to apply and the section as 

a whole is intended to apply in other 
circumstances. It is not the purpose of 
this section to induce you to infringe any 
patents or other property right claims or 
to contest validity of any such claims; this 
section has the sole purpose of protecting 
the integrity of the free software distribution 
system, which is implemented by public 
license practices. Many people have made 
generous contributions to the wide range 
of software distributed through that system 
in reliance on consistent application of that 
system ; it is up to the author/donor to 
decide if he or she is willing to distribute 
software through any other system and a 
licensee cannot impose that choice. 
This section is intended to make thoroughly 
clear what is believed to be a consequence 
of the rest of this License.

8.  If the distribution and/or use of the 

Program is restricted in certain countries 
either by patents or by copyrighted 
interfaces, the original copyright holder 
who places the Program under this 
License may add an explicit geographical 
distribution limitation excluding those 
countries,so that distribution is permitted 
only in or among countries not thus 
excluded. In such case, this License 
incorporates the limitation as if written in 
the body of this License.

9.  The Free Software Foundation may 

publish revised and/or new versions of 
the General Public License from time to 
time. Such new versions will be similar 
in spirit to the present version, but may 
differ in detail to address new problems 
or concerns.

Each version is given a distinguishing 
version number. If the Program specifies 
a version number of this License which 
applies to it and "any later version", you 
have the option of following the terms and 
conditions either of that version or of any 
later version published by the Free Software 
Foundation. If the Program does not specify 
a version number of this License, you may 

Summary of Contents for SNV-3080






















































































































Reviews: