English
_71
●
SETUP SCREEN
Time schedule
You can configure so that an event will occur at a scheduled time regardless of the actual
occurrence of the event.
1.
From the Setup menu, select the
<
Event (
)
> tab.
2.
Click <
Time schedule
>.
To set the timer event
1.
Set <
Timer event setup
> to <
Enable
>.
2.
Specify the <
Activation time
>.
•
Always : Always activates in operated
mode at the set interval.
•
Only scheduled time : Periodically
activates in operated mode at a
specified time and date.
3.
Specify the <
Transfer interval
>.
4.
Specify the activation conditions.
•
FTP sending : Specify the use of the FTP transfer if an event occurs.
•
Record : Specify the use of recording if an event occurs.
5.
When done, click [
Apply (
)
].
Network disconnect
You can perform the saving/relay operation after receiving an event of a physically
disconnected network.
1.
From the Setup menu, select the
<
Event (
)
> tab.
2.
Click <
Network disconnect
>.
3.
Specify the use of “Network
disconnect”.
4.
Specify the activation time and
activation condition.
For more information about <
Activation
time
> and <
Action
>, refer to “
Alarm input
”.
(page 62)
5.
When done, click [
Apply (
)
].
Summary of Contents for SNO-7080R
Page 1: ...NETWORK CAMERA User Manual SNO 7080R ...
Page 101: ......
