recording
Basic procedures to record a video or photo image are described below and on the following pages.
RECORDING VIDEOS
The camcorder provides two
Recording start/stop
buttons. One is on the rear side of the
camcorder and the other one is on the LCD panel. Select the one that works best for you.
1.
Open the LCD screen to turn on the camcorder.
You can also turn the camcorder on by pressing the
Power
(
) button.
Connect a power source to the camcorder.
➥
page
16
(A battery pack or an AC power adaptor)
Set the appropriate storage media.
➥
page
36 (SMX-K44/K45 only)
(If you want to record on a memory card, insert a memory card.)
If required, change the video resolution and aspect ratio at your preference.
2.
Check the subject on the LCD screen.
3.
Press the
Recording start/stop
button.
The recording indicator ( ) will display and recording will start.
To stop recording, press the
Recording start/stop
button again.
4.
When recording is fi nished, turn the camcorder off.
•
•
•
•
•
•
•
WARNING
Samsung is not responsible for any loss or damages due to the memory card problem such as saving failures and abnormal
playbacks.
Beware that you can not recover a damaged recorded data.
Do not disconnect the power source (battery pack, AC adaptor) during a recording. Otherwise, it may cause damage to the
storage media or data corruption.
•
•
•
quick View
Using the Quick View function, you can view the most recently recorded video or photo image right after your recording.
1.
Press the
OK
button in STBY mode right after your recording.
Shortcut menu (OK guide) is displayed on the LCD screen.
2.
Press the
Control
button (
) to view the most recent video (or photo) you have recorded.
After the Quick view is fi nished, your camcorder switches back to the STBY mode.
During a Quick view, use the
Control
buttons (
/
/
/
OK
) for playback search or deleting
the current file.
•
•
•
The Quick View function is not available in the following conditions:
- If the mode has been changed after the recording or the camcorder is connected USB cable.
- If the camcorder has been turned off and on again after the recording.
For on-screen information display.
➥
page 25
Eject the battery pack when you have fi nished recording to prevent unnecessary battery power consumption.
For various functions available when you record videos.
➥
pages 53~68
During recording, some button operations are unavailable. (
MODE
button,
MENU
button, etc.)
•
•
•
•
9999
0:00:00 [475Min]
42_
English
~
{
vu
vmm
tvkl
Auto Exposure
9999
0:00:00 [475Min]
STBY
