8
9
8
9
ANTI-SHAKE (HDIS)
Use the Anti-Shake (HDIS) function to compensate for unstable
images caused by shaking movements when holding the
camcorder.
Select the Record (
/
) mode by pressing the
MODE
button.
page 24
1.
Press the
MENU
button
Control (Left/Right)
button
“Anti-Shake (HDIS).”
2.
Select the desired submenu item
with the
Control (Up/Down)
button, and then press the
OK
button.
3.
Press the
MENU
button to exit the
menu.
Tip
Use the Anti-Shake function in the following cases:
When recording while using the zoom extensively.
When recording a close up picture of a small object.
When recording while walking, or moving.
When recording through a window from inside a vehicle.
•
•
•
•
The SMART AUTO mode automatically sets the Anti-Shake (HDIS) to
On.
Gross camcorder shake may not be entirely corrected even if “
Anti-
Shake (HDIS): On
” is set. Firmly hold the camcorder with both
hands.
When this function is set to “
On,
” the actual movement of the subject
and the movement displayed on the screen may be slightly different.
Recording in low lighting and at high magnification with this function
set to “
On
” may cause after images. If this occurs, we recommend
using a tripod (not supplied) and turning the “
Anti-Shake (HDIS)
” to
“
Off.
”
•
•
•
•
Recording options
Submenu Items
Items
Use
On-screen
display
Off
To disable the function.
-
On
To enable the Anti-Shake (HDIS) function to
compensate for shaking movements.
Exit
STBY
0:00:00 [475Min]
Anti-Shake(
HDIS
)
Off
On
STBY
0:00:00 [475Min]
Anti-Shake(
HDIS
)
Off
On
Exit
