Samsung SMT-i6020 User Manual Download Page 89

Page: 89 / 95

SMT-i6020/6021 User Guide _

ANNEX

Product Specifications

The features and specifications of the SMT-6020/6021 are as follows.

Item

Specifications

Model

SMT-i6020/6021

Weight (kg)

1,280 g ± 5 % (Full Set; Unit Box included),

Single Piece: 1,000 g ± 5 %

Dimensions (mm)

240 (Width) × 181 (Depth) × 164 (Height)

LCD

Mono Graphic LCD (384 × 160 Pixel)

Adaptor input power

AC 100-250 V/50-60 Hz, 1.0 A

Adaptor output power

DC 12 V; 2 A

PoE Input Power

DC 48 V; 0.3 A

PoE Device

802.3 af standard support (For CLASS 0)

Operating conditions

Temperature: 0-45°C, humidity: 10-90 %

Class B Device (Broadcasting communication device for home use)

This device obtained EMC registration mainly for home use (Class B) and may be
used in all areas.

Caution: This wireless device is subject to electromagnetic interference.

Summary of Contents for SMT-i6020
































































































Search results

Summary of Contents for SMT-i6020

Reviews:

Related manuals for SMT-i6020

Brands by name

Popular brands

Samsung SMT-i6020, User Manual

Search results

Summary of Contents for SMT-i6020

Reviews:

Related manuals for SMT-i6020

Brands by name

Popular brands