Samsung SMT-i5343 Manual Download

Page: 20 / 125

Version 1.0

September 2014

Page | 19

Phone Information Display

Phone Status Indicator

Indicator light is on or off depending on the phone status.

Situation

Indicator Status

In a call

Red indicator light stays on.

When the phone is ringing to alert the
user to an incoming call

Red indicator light blinks.

When a voice message is left

Red indicator light blinks.

LED Indicator

LEDs of the following buttons are on or off depending on the status.

Button

LED

LED Status

Description

Speaker

Red indicator light turns on.

The speaker phone feature is enabled.

Mute

Red indicator light turns on.

The microphone is muted and the user

’s

voice cannot be heard by the other party.

Headset

Red indicator light turns on.

The headset is used for the call.

Program
Keys

Blinks fast in red (0.3 sec.)

When the user is receiving an incoming call.

Blinks slowly in red (1.5 sec.)

The user is on hold.

Red indicator light turns on.

The user is busy or the corresponding
function is enabled.

Summary of Contents for SMT-i5343






























































































































Search results

Summary of Contents for SMT-i5343

Reviews:

Related manuals for SMT-i5343

Brands by name

Popular brands

Samsung SMT-i5343, Manual

Search results

Summary of Contents for SMT-i5343

Reviews:

Related manuals for SMT-i5343

Brands by name

Popular brands