Samsung SL-M4080FX Service Manual Download Page 183

Page: 183 / 222

4. Troubleshooting

► Error Code

M3–1110 / M3–1112

► Error message

Paper jam in exit area. Please remove the paper

Paper jam inside of machine. Please remove the paper

► Symptom

A paper jam was detected in the exit area.

► Troubleshooting method

1) Remove the jammed paper.

2) Check if there is any obstacles or contamination in the paper path. If yes, clean or remove it.

3) Check the connection between the exit/fuser drive unit and the main board. Reconnect the motor harness.

4) If the exit/fuser drive unit operation is abnormal, replace it.

5) If the paper is jammed in the exit unit continually, replace the exit unit.

6) If the paper is jammed in the fuser unit continually, replace the fuser unit.

4-86

Summary of Contents for SL-M4080FX






















































































































































































































Search results

Summary of Contents for SL-M4080FX

Reviews:

Samsung SL-M4080FX, Service Manual, Page: 183 / 222

Search results

Summary of Contents for SL-M4080FX

Reviews: