Samsung SL-M4080FX Service Manual Download Page 175

Page: 175 / 222

4. Troubleshooting

► Error Code

H1-1410 / H1–1411

► Error message

Paper jam in tray 4

► Symptom

Paper jam has occurred in tray4.

► Troubleshooting method

1) Remove the jammed paper. If the problem persists, check the followings.

2) Check if the paper is loaded in the tray4 properly.

3) Check if the pick up/forward/separation rollers of the tray4 are defective or worn out.

4) Check if the Empty/ Pick up/ Regi-Act sensor of the tray4 is working properly.

5) Check the connection between the motor/clutch and the SCF board. Reconnect the harness.

6) If the problem persists after checking No. 1~5, replace the SCF board.

► Error Code

H1-1420

► Error message

Tray 4 door is open. Close it

► Symptom

Tray 4 door is open.

► Troubleshooting method

1) Check if the tray4 door is closed. If not, close it.

2) If the problem persists, check the door open sensor. If it is defective, replace it.

3) If the sensor is normal, replace the SCF board.

4-78

Summary of Contents for SL-M4080FX






















































































































































































































Search results

Summary of Contents for SL-M4080FX

Reviews:

Samsung SL-M4080FX, Service Manual, Page: 175 / 222

Search results

Summary of Contents for SL-M4080FX

Reviews: