Samsung SL-C2670FW Service Manual Download Page 98

Page: 98 / 147

4. Alignment and Troubleshooting

4.1.6. Updating Firmware

This chapter includes instructions for updating the printer firmware. You can update the printer firmware by using one
of the following methods :

•

Update the firmware by using the USB port.

•

Update the firmware by using the Network.

4.1.6.1. Update the firmware by using the USB port

Upgrading preparations

NOTE

Firmware file can be downloaded from the GSPN or TSP site.

•

C2670_Vx.xx.xx.xx.exe file

Upgrade Procedure

CAUTION

•

Please do not turn off the printer and your computer until firmware update finishes.

•

If you are using USB connection, disconnect all other USB printers from the PC.

•

The firmware update you are about to install has been tested for compatibility with Samsung toner cartridge
products ONLY. Installing the upgrade may cause a non-Samsung toner cartridge to malfunction.

•

Do not run your printer during the firmware update.(Do not have any print job)

1) Make sure that the machine is connected to the PC with a USB cable or Network.

2) Execute the firmware exe file.

3) Please wait until the machine is reboot.

4-21

Summary of Contents for SL-C2670FW
















































































































































Search results

Summary of Contents for SL-C2670FW

Reviews:

Related manuals for SL-C2670FW

Brands by name

Popular brands

Samsung SL-C2670FW, Service Manual

Search results

Summary of Contents for SL-C2670FW

Reviews:

Related manuals for SL-C2670FW

Brands by name

Popular brands