Samsung SL-C2670FW, Service Manual

Page: 104 / 147

4. Alignment and Troubleshooting
020-044 V.29 9600 bps Line1
020-045 V.17 7200 bps Line1
020-046 V.17 9600 bps Line1
020-047 V.17 12000 bps Line1
020-048 V.17 14400 bps Line1
020-049 V.34 2400 bps Line1
020-050 V.34 4800 bps Line1
020-051 V.34 7200 bps Line1
020-052 V.34 9600 bps Line1
020-053 V.34 12000 bps Line1
020-054 V.34 14400 bps Line1
020-055 V.34 16800 bps Line1
020-056 V.34 19200 bps Line1
020-057 V.34 21600 bps Line1
020-058 V.34 24000 bps Line1
020-059 V.34 26400 bps Line1
020-060 V.34 28800 bps Line1
020-061 V.34 31200 bps Line1
020-062 V.34 33600 bps Line1
e) Report
•
Shading Test
This function is to check quality of scanned images, especially defect in optical devices, including lens, mirror, lamp,
and etc, are suspected.
•
Memory Clear
The function resets the system to factory default settings. This function is used to reset the system to the initial value
when the product is functioning abnormally . All the values are returned to the default values, and all the information,
which was set by the user, will be erased.
•
Toner Low Level
The function is to set up the time to inform toner low status. This function can provide user convenience for replacing
the toner cartridge.
•
Counter Reset
This function resets the count value you select.
•
Engine Footer
This function is for monitoring of the engine status. If you perform this function, at printing, the setting value for engine
is shown on the bottom of the printed page.
4-27 Copyright© 1995-2016 SAMSUNG. All rights reserved.