Samsung SH37F User Manual Download

Page: 38 / 159

Connecting and Using a Source Device

Before Connecting

Pre-connection Checkpoints

― Before connecting a source device, read the user manual provided with it.

The number and locations of ports on source devices may differ from device to device.

― Do not connect the power cable until all connections are completed.

Connecting the power cable during connection may damage the product.

― Connect the sound ports correctly: left = white and right = red.

― Check the types of ports at the back of the product you want to connect.

Connecting to a PC

• Do not connect the power cable before connecting all other cables.

Ensure you connect a source device first before connecting the power cable.

• A PC can be connected to the product in a variety of ways.

Select a connection method suitable for your PC.

― Connecting parts may differ in different products.

Connection using the DVI-RGB cable

DVI/RGB/

MAGICINFO IN

AUDIO IN

Chapter 03

Summary of Contents for SH37F
































































































































































Search results

Summary of Contents for SH37F

Reviews:

Related manuals for SH37F

Brands by name

Popular brands

Samsung SH37F, User Manual

Search results

Summary of Contents for SH37F

Reviews:

Related manuals for SH37F

Brands by name

Popular brands