Samsung SH37F User Manual Download

Page: 66 / 159

File Formats Compatible with Videowall

― Refer to the <MagicInfo Server user's manual> for further details.

Video

Image

• 3D video is not supported.

• Content with a resolution larger than the resolution specified in the

table above is not supported.

• Video content with a Bit rate or Frame rate larger than the rate

specified in the table above can cause choppy video during playback.

• Video content will not play, or not play correctly, if there is an error in

the content or the container.

• Some USB/digital camera devices may not be compatible with the

player.

• Supports up to H.264, Level 4.1

• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not

supported.

• For all Video codecs except MVC, VP8, VP6:

–

Below 1280 x 720: 60 frame max

–

Above 1280 x 720: 30 frame max

• GMC 2 or higher is not supported.

• Supports only BD MVC Spec.

• Some codecs may not be supported in portrait playback mode.

• Compatible image file format : Jpeg, bmp, png

• Supported maximum resolution : 15,360 x 8,640

― A higher resolution image may take longer to display on the screen.

Summary of Contents for SH37F
































































































































































Search results

Summary of Contents for SH37F

Reviews:

Related manuals for SH37F

Brands by name

Popular brands

Samsung SH37F, User Manual

Search results

Summary of Contents for SH37F

Reviews:

Related manuals for SH37F

Brands by name

Popular brands