Samsung SH37F User Manual Download

Page: 63 / 159

Video

Audio

Image

• 3D video is not supported.

• Content with a resolution larger than the

resolution specified in the table above is not

supported.

• Video content with a Bit rate or Frame rate larger

than the rate specified in the table above can

cause choppy video during playback.

• Video content will not play, or not play correctly, if

there is an error in the content or the container.

• Some USB/digital camera devices may not be

compatible with the player.

• Supports up to H.264, Level 4.1

• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and

AVCHD are not supported.

• For all Video codecs except MVC, VP8, VP6:

–

Below 1280 x 720: 60 frame max

–

Above 1280 x 720: 30 frame max

• GMC 2 or higher is not supported.

• Supports only BD MVC Spec.

• Only one video file can play at a time if video files

on the monitor use incompatible codecs or the

resolution is 1080 x 1920.

• When a single video file is playing, Seamless mode

is not supported under the following conditions:

–

Incompatible codec (MVC, VP3, MJPEG)

↔

Incompatible codec

–

Incompatible codec

↔

Compatible codec

– The resolution is different from that of the

monitor

– The frequency is different from that of the

monitor

• Audio content with a Bit rate or

Frame rate larger than the rate

specified in the table above can

cause choppy audio during playback.

• Video content will not play, or not

play correctly, if there is an error in

the content or the container.

• Some USB/digital camera devices

may not be compatible with the

player.

• Supports up to WMA 10 Pro 5.1

channel. WMA lossless audio is not

supported.

•

QCELP, AMR NB/WB are not

supported.

• Compatible image file format : JPEG, PNG,

BMP

–

32-bit, 24-bit and 8-bit BMP files are

supported.

• Supported maximum resolution : 4096 x

4096

•

Supported maximum file size: 20MB

•

Supported image effects : 9 effects
(

Fade1

Fade2

Blind

Spiral

Checker

Linear

Stairs

Wipe

Random

)

Summary of Contents for SH37F
































































































































































Search results

Summary of Contents for SH37F

Reviews:

Related manuals for SH37F

Brands by name

Popular brands

Samsung SH37F, User Manual

Search results

Summary of Contents for SH37F

Reviews:

Related manuals for SH37F

Brands by name

Popular brands