Multimedia Messages
90
Setup
(Menu 2.8)
You can change the default settings for sending or
receiving multimedia messages.
The following options are available:
Delivery Report: when this option is enabled, the
network informs you whether or not your message
has been delivered.
Read Reply: when this option is enabled, your
phone sends a request for a reply along with your
message to the recipient.
Auto Download: you can set whether or not your
phone retrieves new incoming messages from the
MMS server without notifications. When this option is
enabled, the phone automatically retrieves new
messages from the server. As soon as you receive a
message, you can use more options while reading it.
See page 81 for further details about the options.
Message Acceptance: you can specify the category
of messages you want to receive.
Hide ID: when this option is enabled, your phone
number does not display on the recipient’s phone.
Expiry Date: you can select the length of time your
messages are stored at the message centre after
they are sent.
Delivery Time: you can set a delay time before the
phone sends your messages.
Priority: you can select the priority level of your
messages.
Report Allowed: when this option is enabled, the
sender of an incoming message receives a delivery
report from the network.
Multimedia Messages
91
Page Duration: you can set how long one page of
the received message displays on the message
presentation screen. After a specified time, the
display automatically scrolls to the next page.
MMS Profile
(Menu 2.9)
In this menu, you can configure various network
settings that are required when you send or receive
multimedia messages.
Notes:
• The last profile you accessed is automatically activated
for sending messages.
• If you change the MMS settings without first checking
with your service provider, the MMS feature may not
work properly.
The following options are available for each profile:
Profile Name: enter a name that you wish to assign
to the MMS server.
Connection URL: enter the address of your MMS
server.
Security: select a data transmission mode. Choose
Secure to protect your data against unauthorised
access; otherwise, choose Non-Secure.
IP Address: enter the gateway address required to
connect to the MMS server.
User Name: enter the user ID required to connect to
the MMS server.
Password: enter the password required to connect
to the MMS server.
APN: enter the access point name used for the
address of the MMS server.
For further details, contact your service provider.
